Ayre K-3 Bedienungsanleitung PDF herunterladen (Seite 12)

Ayre manufactures both adapters and dedicated cables.

These high-performance custom designs are available from

your authorized Ayre dealer. In addition, termination

instructions are available if you wish to reterminate your

current cables. Please contact the factory for further details,

or refer to our web site at

www.ayre.com

*DLQDQG/RDGLQJ

The gain is factory-set to 50

dB, which is well suited to

most modern phono cartridges.

The gain of the phono stage is adjustable in 10 dB steps

from 40 dB to 60 dB, accommodating virtually any

cartridge made. Recommended gain settings are as follows:

&DUWULGJH2XWSXW 3KRQR*DLQ *DLQ5HVLVWRU

Less than 1.0 mV . . . . . 60 dB . . . . . . 20Ω

1.0 mV to 3.0 mV . . . . 50 dB . . . . . . 150Ω

Greater than 3.0 mV . . . 40 dB . . . . . . 500Ω

These are guidelines only. Variations from these settings are

perfectly acceptable.

It is recommended that the

loading not be changed from

50 k

Ω

when using a

moving-magnet cartridge.

The default cartridge load is 50 kΩ, which is suitable for

almost all cartridges. However, many moving-coil

cartridges yield better performance if they are loaded with a

lower impedance.

Usually, a lower load impedance results in a more focused

soundstage, with greater image solidity and less apparent

distortion. A higher load impedance will give a more open

sound, with greater air and life. The final value must be

chosen by ear to give the best sound in your particular

system.

Page 10

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Keine Kommentare

Ayre K-3 Bedienungsanleitung Seite 12