Ayre K-3 Bedienungsanleitung PDF herunterladen (Seite 16)

,Q&DVHRI

Trouble

Should the Ayre K-3x preamplifier ever fail to operate

properly, please check the following:

Symptom: Remote control not

working.

Check the batteries located in the remote control.

Symptom: No sound, and the

status indicator is glowing

red.

If the AC line voltage drops below 80% of normal

(brown-out), the outputs will mute and the indicator light

will glow red. After the line voltage returns to normal, the

initial power-up cycle will begin again.

Symptom: Status indicator

lamp not lit.

Should the AC line lose power, the preamplifiers outputs

are immediately muted. This avoids any loudspeaker

damage due to thumps or pops.

1) Be sure that the power supply unit is connected to a

working AC outlet.

2) Check the AC line fuse.

To check the fuse, locate the rectangular fuse holder

mounted on the rear panel of the power supply. Press

downwards on the top edge, then pull outward. There are

two fuses mounted in the fuse holder. The inner one is the

operating fuse, and the outer one is a spare.

Page 14

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Keine Kommentare

Ayre K-3 Bedienungsanleitung Seite 16